Please be reminded of what AIDKA helmet requirements are. It is the Driver/Parent/Guardian’s responsibility to make sure the helmet complies with our rules. Helmets a) Must be in sound condition, fitted and worn as per the manufacturer’s instructions b) Must have a date of manufacture, maximum age less than 10 years from this date c) Must be Full Face, and bear a label indicating they comply with one of the following standards: (i) AS/NZS 1698 (ii) ECE 22.05 (iii) Snell SA2010, SAH2010, SA2015, M2010, M2015, K2010, K2015 (iv) Snell-FIA CMR2007, CMS2007, CMR2016, CMS2016 (v) SFI 24.1, 31.1, 31.1A, 32.2A (vi) FIA-8860, FIA-8859 d) Must be fitted with either a shatterproof visor as supplied by the manufacturer or googles. Tear-offs, Roll-ons or similar must be used to maintain good vision, and must have a device to retain them to the helmet when used (i.e. rubber grommet or zip-tie) Visors must be closed whilst the kart is under power within the race arena. e) Cameras are not permitted to be mounted on helmets. f) Must be scrutineered, with an AIDKA approval decal applied, and details recorded into the user’s logbook before used For helmets that comply with UN ECE 22.05, the helmet must bear a label displaying an international approval mark. Look for a label sewn into the retention system of the helmet. The mark is in a form of a circle surrounding the letter ‘E’, followed by the distinguishing number of the country in which the testing and certification was approved.  The number on the right of the ‘E’, therefore, may vary from one model of helmet to another (e.g. 2=France, 3=Italy). The mark must also have information concerning the actual standard with which it applies (i.e. 05 is the ECE 22.05 standard and is followed by the approval number issued in the respective country), the type of helmet (i.e. P is ‘protective’ and J signifies ‘Jet’ style open face approval) and its production serial number. See Rule Book for example…....

2021 AIDKA Licences are now available for purchase. You can renew your licence using the AIDKA App and clicking on the ‘Renew’ link under your licence photo. Alternatively you can renew your licence by clicking and scrolling down under the Licence tab via this website.   COVID Rebate If you paid full price for a Drivers Licence between 1st Feb and 30th June 2020, you will receive a rebate of $70 for Snr licence and $45 for Jnr licence for your 2021 licence. If you purchased your licence between 1st July and end of 2020 season, you already have had the rebate applied via a discounted licence last...

Due to 2020 SA State Titles being deferred due to COVID-19, we are pleased to advise that the 2021 SA Title details are as follows: 2021 SA State Titles hosted by Blanchetown Dirt Kart Club Fri 30th April – Sun 2nd May 2021

Please be reminded that all helmets must have Date of Manufacture details. Please be vigilant when purchasing a helmet to use at an AIDKA sanctioned event. The responsibility lies with the user to make sure it fits correctly and that it complies with our rules.   Rule  13.1      Helmets a) Must be in sound condition, fitted and worn as per the manufacturer’s instructions  b) Must have a date of manufacture, maximum age no more than 10 years from this date c) Must be Full Face, and bear a label indicating they comply with one of the following standards: (i) AS/NZS 1698 (ii) ECE22.05 (iii) Snell SA2010, SAH2010, SA2015, M2010, M2015, K2010, K2015 (iv) Snell-FIA CMR2007, CMS2007, CMR2016, CMS2016 (v) SFI 24.1, 31.1, 31.1A, 32.2A (vi) FIA-8860, FIA-8859   d) Must be fitted with either a shatterproof visor as supplied by the manufacturer or googles.  Tear-offs, Roll-ons or similar must be used to maintain good vision, and must have a device to retain them to the helmet when used (i.e. rubber grommet or zip-tie) Visors must be closed whilst the kart is under power within the race arena. e) Cameras are not permitted to be mounted on helmets. f) Must be scrutineered, with an AIDKA approval decal applied, and details recorded into the user’s logbook before...

Please be advised that we are holding our AGM on Friday 13th November 2020 after our Council meeting (starting @ 7.30pm SA time). This will be held via Zoom. Please contact the AIDKA Secretary if you wish to attend so you can receive an invite to the Zoom session. (secretary@aidka.com.au) Notice of...